technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http:/ /www.micros emi.com rf01005 rev d , november 2010 high rel iability product group page 1 of 4 devices mplad30kp14a thru mplad30kp400ca, e3 levels m, ma, mx, mxl features ? high reliability controlled devices with fab rication and assembly lot traceability ? 100 % surge tested devices ? low profile surface mount ? optional upscreening available by replacing the m prefix with m a, mx or mxl. these prefixes specify various screening and conforman ce inspection options based on mil - prf - 19500. refer to micro n ote 129 for more details on the screening options. ? suppresses transient s up to 30 k w @ 10/1000 s and 200 k w @ 8/20 s (see f igure 1) ? moisture classification is level 1 with no dry pack required per ipc/jedec j - std - 020b ? rohs compliant devices available by adding an e3 suffi x ? 3 lot norm screening performed on standby current i d applications / benefits ? protection from switching transients and induced rf ? protection from esd, and eft per iec 61000 - 4 - 2 and iec 61000 - 4 - 4 ? secondary lightning protection per iec 61000 - 4 - 5 with 42 oh ms source impedance: o class 1,2,3,4 ,5 : mplad30kp14 a to 400ca o class 5: mplad30kp14 a to 4 00ca (short distance) o class 5: mplad30kp14a to 220ca (long distance) ? secondary lightning protection per iec 61000 - 4 - 5 with 12 ohms source impedance: o class 1,2,3 : mplad30 kp14a to 400ca o class 4: mplad30kp14 a to 220ca ? secondary lightning protection per iec 61000 - 4 - 5 with 2 ohms source impedance: o class 2 : mplad30kp10a to 400ca o class 3: mplad 30 kp 14 a to 2 2 0ca o class 4: mplad 30 kp 14a to 110 ca maximum ratings ? peak pulse power dissipation at 25 c : 30 ,000 watts at 10/1000 s (also see figures 1 and 2) with impulse repetition rate (duty factor) of 0.05 % or less ? t clamping (0 volts to v br min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional ? operating and s torage temperature: - 65 oc to +150 oc ? thermal resistanc e : 0.5 oc/w junction to case or 50oc/w junction to ambient when mounted on fr4 pc board with recommended mounting pad (see page 2 ) ? steady - state power dissipation: 2 50 watts at t c = 25 c or 2.5 wat ts at t a = 25 c when mounted on fr4 pc board as described for thermal resistance ? forward surge voltage: 1500 amps (theoretical) at 8.3ms half - sine wave (unidirectional devices only) ? solder temperatures: 260 oc for 10 s (maximum) surface mount 30 ,000 w transient voltage suppressor - high reliability controlled devices - unidirectional (a) and bidirectional (ca) construction - selections for 14 to 400 v standoff voltages (v wm ) - fast response
technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http: //www.micros emi.com _____________________________________________________________________________________________________________________________ ______ rf0100 5 rev d , november 2010 high rel iability product group page 2 of 4 m echanical and packag ing ? case: void - free transfer molded thermosetting epoxy body meeting ul94v - 0 . ? terminals: tin - lead (90 % sn, 10 % pb) or rohs (100% sn) compliant annealed matte - tin plating readily solderable per mil - std - 750, method 2026 . ? marking: body marked with part number ? polarity: for unidirectional devices, the cathode is on the metal backside (package bottom) ? available in bulk or custom tape - and - reel packaging ? tape - and - reel : standard per eia - 481 - b (add tr suffix to part number) ? weight: 1 .7 - 2.0 gram s (approxi mate ly ) package and mounting pad dimensions inches [mm] symbols & definitions symbol definition symbol definition v wm working peak (standoff) voltage i pp peak pulse current p pp peak pulse power v c clamping voltage v br breakdown voltage i br breakdown current for v br i d standby current
technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http: //www.micros emi.com _____________________________________________________________________________________________________________________________ ______ rf0100 5 rev d , november 2010 high rel iability product group page 3 of 4 electrical characteristics @ 25 o c microsemi part number (note 2) reverse stand - off voltage v wm (note 1) volts breakdown voltage v br @ i br v olts ma maximum clamping voltage v c @ i pp volts maximum standby current i d @ v wm ? a maximum peak pulse current i pp (fig. 3) a maximum temperatur e coe fficient of v br ( v(br ) ) mv/ oc mplad30kp14a mplad30kp15a mplad30kp14ca mplad30kp15ca 14 15 15.6 C 17.2 16.7 C 18.5 150 5 24.0 25.8 3000 750 1251 1164 10 12 mplad30kp16a mplad30kp17a mplad30kp16ca mplad30kp17ca 16 17 17.8 C 19.7 18.9 C 20.9 5 5 27.2 28.8 450 150 1101 1041 12 14 mplad30kp18a mplad30kp20a mplad30kp18ca mplad30kp20ca 18 20 20.0 C 22.1 22.2 C 24.5 5 5 30.8 34.0 60 45 97 5 882 16 18 mplad30kp22a mplad30kp24a mplad30kp22ca mplad30kp24ca 22 24 24.4 C 26.9 26.7 C 29.5 5 5 36.4 39.8 10 10 822 753 20 22 mplad30kp26a mplad30kp28a mplad30kp26ca mplad30kp28ca 26 28 28.9 C 31.9 31.1 C 34.4 5 5 43.0 46.4 10 10 696 645 24 26 mplad 30kp30a mplad30kp33a mplad30kp30ca mplad30kp33ca 30 33 33.3 C 36.8 36.7 C 40.6 5 5 48.8 53.3 10 10 618 564 30 35 mplad30kp36a mplad30kp40a mplad30kp36ca mplad30kp40ca 36 40 40.0 C 44.2 44.4 C 49.1 5 5 58.1 64.5 10 10 516 468 38 44 mplad30kp43a mplad30kp4 5a mplad30kp43ca mplad30kp45ca 43 45 47.8 C 52.8 50.0 C 55.3 5 5 69.4 72.7 10 10 432 414 50 51 mplad30kp48a mplad30kp51a mplad30kp48ca mplad30kp51ca 48 51 53.3 C 58.9 56.7 C 62.7 5 5 77.4 82.4 10 10 390 366 54 58 mplad30kp54a mplad30kp58a mplad30kp54ca m plad30kp58ca 54 58 60.0 C 66.3 64.4 C 71.2 5 5 87.1 93.6 10 10 342 318 64 70 mplad30kp60a mplad30kp64a mplad30kp60ca mplad30kp64ca 60 64 66.7 C 73.7 71.1 C 78.6 5 5 96.8 103.0 10 10 312 294 72 75 mplad30kp70a mplad30kp75a mplad30kp70ca mplad30kp75ca 70 7 5 77.8 C 86.0 83.3 C 92.1 5 5 113 121 10 10 264 246 84 90 mplad30kp78a mplad30kp85a mplad30kp78ca mplad30kp85ca 78 85 86.7 C 95.8 94.4 - 104.0 5 5 126 137 10 10 240 216 95 104 mplad30kp90a mplad30kp100a mplad30kp90ca mplad30kp100ca 90 100 100 C 111 111 C 123 5 5 146 162 10 10 204 186 109 122 mplad30kp110a mplad30kp120a mplad30kp110ca mplad30kp120ca 110 120 122 C 135 133 C 147 5 5 177 193 10 10 168 156 132 145 mplad30kp130a mplad30kp150a mplad30kp130ca mplad30kp150ca 130 150 144 C 159 167 C 185 5 5 209 243 10 10 142 124 157 183 mplad30kp160a mplad30kp170a mplad30kp160ca mplad30kp170ca 160 170 178 C 197 189 C 209 5 5 259 275 10 10 116 110 195 207 mplad30kp180a mplad30kp200a mplad30kp180ca mplad30kp200ca 180 200 200 C 221 222 C 245 5 5 291 322 10 10 104 94 219 243 mplad30kp220a mplad30kp260a mplad30kp220ca mplad30kp260ca 220 260 245 C 271 289 C 320 5 5 356 419 10 10 84 71 269 318 mplad30kp280a mplad30kp300a mplad30kp350a mplad30kp400a mplad30kp280ca mplad30kp300ca mplad30kp350ca mplad30kp400ca 280 300 350 400 311 C 345 333 C 369 389 C 431 444 - 492 5 5 5 5 451 483 564 644 10 10 10 10 66 62 53 46 344 368 430 490 note 1: transient voltage suppressors are normally selected with reverse stand off voltage v wm , which should be equal to or greater than the dc or continuous peak operating voltage level note 2: for bidirectional construction, indicate a ca suffix after the part number note 3: items listed in bold above are available ex - stock or with a short lead - time
technical data sheet gort road business park, ennis, co. clare, ireland. 6 lake street, lawrence, ma 01841 tel: +353 (0) 65 6840044 , fax: +353 (0) 65 6822298 tel: 1 - 800 - 446 - 1158 / (978) 794 - 1666, fax: (978) 6890803 website: http: //www.micros emi.com _____________________________________________________________________________________________________________________________ ______ rf0100 5 rev d , november 2010 high rel iability product group page 4 of 4 graphs tp C pulse time C sec figure 1 peak pulse power vs. pulse time t l lead temperature c test waveform parameters: tr = 10 ? s, tp = 1000 ? s figure 2 : pulse waveform figure 3: derating curve p pp peak pulse power - kw peak pulse power (p pp ) or continuous power in percent of 25 c rating
|
